The growth of digital poker communities has encouraged more players to learn strategies and responsible bankroll management. In many online forums discussing competitive card platforms, idnpoker is frequently mentioned alongside other well-known environments supporting balanced gameplay and stable gaming infrastructure.

Integrated Macau data is a systematic recapitulation of Toto Macau 4D and 5D results in tabular form. Here, we provide a table displaying the live Toto Macau draw results, including the date, day, period, and winning 4D and 5D numbers for 2026.

mccPILOTLOG - Version 4.0 (BETA)

Thank you for your interest in mccPILOTLOG - Version 4.0 (BETA).

Today, over 25,000 crew members use mccPILOTLOG / mccROSTER software. On request of many pilots using Mac OS at home, we decided to develop a cross-platform application.

This new cross-platform application is developed under MS Windows, but it runs fine on Mac OS without any virtual Windows platform ! This application may not have the 'look-and-feel' you would expect from native Mac software. However, mccPILOTLOG is the only electronic pilot logbook offering you the freedom of combining any desktop platform (MS Windows, Mac OS) with any mobile system (iOS, Android, Blackberry, WinPhone, Kindle) !

Here are some screenshots :

The BETA Test program started back in 2013 and continues until all functions are active (estimated Spring 2015). The BETA program is now open to all pilots.

Terms and Conditions

By participating in the Beta Test program, you accept the following Terms and Conditions :

You understand and accept the fact that bugs will occur and may result in loss of flight data
You accept the fact that the program is not yet complete and that performance requires further optimalisation

Release Notes - BETA RC8 - 17 OCT 2014

In this BETA build all functions are enabled, except for the 2 following :

Mobile App Sync

mccCloud sync is working :

from desktop to desktop (Windows and Mac can be combined)
from desktop to mobile (Android only - iOS expected January 2015)

Due to different technologies, you cannot sync Version 3.x with Version 4.0 ! In Version 3.x the Sync ID has a single trailing digit, like '4H' in PDELUBCPMGPL-4H. In Version 4.0 the Sync ID contains a double digit, like PDELUBCPMGPL-16G. As before, you obtain a Sync ID from the main desktop Settings - Sync PC Mobile page.

During the BETA transition period, the mobile apps can run in Version 3.x or in Version 4.0 mode. The app will automatically detect the Version based on the Sync ID. We have opted to release Android first (december 2014). iOS and WinPhone follow in January 2015.

Airline Interface

mccPILOTLOG imports data from 215 airlines worldwide. Some of those interfaces work off-line (importing a roster file), some connect online (straight with the crew web portal).

In this BETA build, all off-line airline interfaces are implemented and available for import.

The on-line interfaces, that connect straight to AIMS, Sabre and many other portals, are still under development and in-house testing for Version 4.0 The reason for the late delivery is the recent merger of mccPILOTLOG with another company. It was decided to build a more advanced interface based on the experience and knowhow of both companies.

Delivery is planned for Spring 2015. This would conclude the BETA test program, after which Version 4.0 is fully operational.

How to Install the new software Version 4.0

MS Windows

We do no longer support Windows XP. You need Windows Vista, 7 or 8.

	1)	Download the Windows Beta RC8 Installer package for MS Windows. After download, unzip the package and run the installer.

	2)	Convert the database (guidelines are listed below)

Apple Mac OS

	1)	You must first download and install the MONO (Version 2.10) run-time platform. Click HERE to download the installer

	2)	Some pilots reported they also needed to install Xquartz for Mac OS

	3)	Download the Mac OS Beta RC12 Installer package for Max OS 10 or later. After download, unzip the package and run the installer.

	4)	Convert the database (guidelines are listed below)

BETA RC8 comes with automatic software updates. When a new software update is detected, a notification is displayed in the right upper corner of the application. Contrary to Version 3.x, the new software will not automatically download that update. In the application, click on the Home page notification or go to the Tools - Update Software page to download and install the new update.

Make sure to install the latest update : After installation, start the application and go to the Tools - Software Update page and install the latest update !!

Mac OS : The application is now saved as an exception to your security settings. You can now open the application with a simple double-click, just like any other registered app.

How to Convert the Database from Version 3.x to Version 4.0

In the active Windows based mccPILOTLOG logbook software (Version 3x), do the following steps in the application :

	1)	Go to the About page and make sure you have the 15 NOV (or later) Build Date. (If that is not the case, go to the Tools - Helpdesk page and click on Re-Install Last Update)

	2)	go to the Tools - Helpdesk page and execute the following command in the Run Action box : mac=beta

	3)	Run the Convert wizard to convert the database. (some pilots reported error 'ActiveX component can't create object - see fix below)

Now, if you have the ENT (Entreprise) Edition :

The new database is automatically stored on mccCloud. You can retrieve the database from the application Tools - Backup page in the new software Version 4.0 !

If you have the free STD (Standard) or the PRO (Professional) Edition :

The database is dropped on the Windows Desktop. Move (copy and paste) the converted database ''database.db'' to the following folder :

          [MS Windows]           C:\Users\%username%\AppData\Roaming\mccPILOTLOG\Userdata

               - notice the difference between the old location (MCC Pilotlog) and the new location (mccPILOTLOG) !
               - override the empty database file with the same name

          [Mac OS]           mccPILOTLOG/Userdata

               - right-mouse click (or [PC keyboard] Control + left-click or [Mac Keyboard] Apple Cmd + click)
               - choose "show package contents"
               - goto "Contents/Resource/Userdata"
               - paste the database file

Error during Database Conversion

Some pilots reported Run Time Error 429 (ActiveX component can't create object) in Version 3.x :

This error indicates that the OCX control is not properly registered to your Windows System. The following procedure should fix the problem :

	1)	In the application, go to the Tools - Helpdesk page and execute the following command from the Run Action box : COM=vbrichclient.zip

	2)	Restart the program from Windows START - MCC Pilotlog - MCC Pilotlog Update Installer

	3)	Problem should be fixed. Try the conversion again with Mac=Beta

If you still get error 429, then do the following actions :

	4)	Download the following component : Rich Client 5 DLL

	5)	Unzip the ZIP file and drop the files in any location, by preference Windows / System, or in the mccPILOTLOG directory

	6)	Right-Mouse click on the RegisterRC5inPlace.vbs script file - Run as Administrator to register the control

	7)	Problem should be fixed. Try the conversion again with Mac=Beta

Bugs with BETA software

Do NOT contact the Helpdesk ! Comments and bugs must be sent straight to the Beta Team through beta @ mccPILOTLOG.net

The BETA Helpdesk is not a 24 / 7 service. Your message will be processed during office hours.